A reciprocating pump is a pump that operates by adding momentum to a liquid while taking in and discharging fluids in a continuous flow across an unsealed chamber.
A ___ is a boiler fitting used to vent air from inside the b…
A ___ is a boiler fitting used to vent air from inside the boiler.
A reciprocating pump is a pump that operates by adding momen…
A reciprocating pump is a pump that operates by adding momentum to a liquid while taking in and discharging fluids in a continuous flow across an unsealed chamber.
When shutting down a boiler, the main steam valve should be…
When shutting down a boiler, the main steam valve should be closed immediately after the furnace is shut down.
A low water fuel cutoff should be tested ___ depending on pl…
A low water fuel cutoff should be tested ___ depending on plant procedures and requirements.
Priming and carryover can be caused by opening a main steam…
Priming and carryover can be caused by opening a main steam valve too quickly.
Boiler conditions that could lead to an emergency are high o…
Boiler conditions that could lead to an emergency are high or low water conditions and flame failure.
For a burner to cut in at 2 psi and cut out at 6 psi, the cu…
For a burner to cut in at 2 psi and cut out at 6 psi, the cut-out pressure should be set at 6 psi and the differential pressure set at ___ psi.
Priming and carryover can be caused by opening a main steam…
Priming and carryover can be caused by opening a main steam valve too quickly.
The Occupational Safety and Health Administration (OSHA) is…
The Occupational Safety and Health Administration (OSHA) is an organization that promotes greater safety to life and property through uniformity in the construction, installation, repair, maintenance, and inspection of boilers and pressure vessels.