A triangular piece of rubber is stretched causing A to move downward. Determine the magnitude of the shear strain that occurs at A when a = 39.7 mm, b = 79.4 mm, and c = 54.4 mm.

A load of 88 kN is applied to a triangular shape that protrudes 15.3 mm from a brass plate. The triangular shape has a base of 26.9 mm and a height of 18.2 mm. Determine the average shear stress between the plate and the protrusion.

An upward load is applied to a circular rod that has a diameter of 10.67 mm. The rod is connected to the ground using a pin that has a diameter of 9.66 mm. If the average shear stress in the pin is limited to 160 MPa, determine the maximum load that can be applied to this connection.

A Great Value can weighs 1.04 lb and is 2.89 in. in diameter. A Libby’s can weighs 1.09 lb and is 2.92 in. in diameter. What is the largest bearing stress that occurs between the cans and the table? Assume each can has a smooth base and sits flat on the table.

A load of 37 kN is applied to a circular shape that protrudes 14.4 mm from a brass plate. The circular shape has a diameter of 17.2 mm. Determine the average shear stress between the plate and the protrusion.

A load of P = 455 lb is applied to beam ABC. Determine the vertical ground reaction at B. Let a = 28 in., b = 15 in., and c = 10 in.

An upward load is applied to a circular rod that has a diameter of 10.25 mm. The rod is connected to the ground using a pin that has a diameter of 9.96 mm. If the average shear stress in the pin is limited to 165 MPa, determine the maximum load that can be applied to this connection.

An aluminum bar with a 1.50-in. gage length, 0.130-in. width, and 0.100-in. thickness is loaded in tension. At the proportional limit, a load of 350 lb elongates the gage length by 0.00372 in. and reduces the width by 0.000084 in. Determine the Poisson’s ratio.

A load of P = 200 lb is applied to beam ABC. Determine the normal force in bar (1). Let a = 38 in., b = 12 in., and c = 9 in.

A Hunts can weighs 0.64 lb and is 2.60 in. in diameter. A Del Monte can weighs 0.56 lb and is 2.54 in. in diameter. What is the largest bearing stress that occurs between the cans and the table? Assume each can has a smooth base and sits flat on the table.