A ___ is a burner accessory that opens when energized by contacts in the programmer to allow fuel oil to flow to a burner nozzle.
A ___ is a burner accessory that opens when energized by con…
A ___ is a burner accessory that opens when energized by contacts in the programmer to allow fuel oil to flow to a burner nozzle.
A boiler must be taken off-line before it can be inspected.
A boiler must be taken off-line before it can be inspected.
A manhole cover can weigh more than 50 lb, and significant i…
A manhole cover can weigh more than 50 lb, and significant injury and/or damage can occur if it is rapidly pulled in by ___ inside the boiler during removal.
A manhole cover can weigh more than 50 lb, and significant i…
A manhole cover can weigh more than 50 lb, and significant injury and/or damage can occur if it is rapidly pulled in by ___ inside the boiler during removal.
Foaming causes corrosion of heat transfer surfaces.
Foaming causes corrosion of heat transfer surfaces.
Foaming causes corrosion of heat transfer surfaces.
Foaming causes corrosion of heat transfer surfaces.
Under all circumstances, electrical equipment should never b…
Under all circumstances, electrical equipment should never be de-energized before maintenance work is performed.
In low pressure steam boilers, the lowest visible part of th…
In low pressure steam boilers, the lowest visible part of the gauge glass must be placed a minimum of 1″ above the lowest permissible water level.
If the stack height is over ___’ or if an extremely large br…
If the stack height is over ___’ or if an extremely large breeching and stack combination causes excessive draft, a damper can be located in the breeching close to the stack.