A driver accidentally bumped a fire hydrant creating a bending moment of 610 N·m in the pipe below. The pipe has an inside diameter of 180 mm and a wall thickness of 6 mm and is pressurized to 330 kPa. Determine the largest normal stress along the length of the pipe.

Force P = 40 N is applied to a lever at the end of a 34-mm-diameter shaft. Force Q = 115 N is applied directly to the shaft. Determine the magnitude of the shear stress τyz at point K. Let a = 135 mm and b = 200 mm.

A tank with an inside diameter of 345 mm, a length of 690 mm, and a wall thickness of 3.3 mm was designed to withstand a pressure of 725 kPa. If the outside of the tank has corroded such that the thickness is now 95% of the original value, what should the pressure now be limited to?

LIMB REATTACHMENT- O.R. room temperature should be warmed to ___________ degrees to prevent vasoconstriction of the extremities.

The pressure hull of a space station module has an inside diameter of 4.7 m, a length of 5.5 m, and a wall thickness of 3.0 mm. It is made from an aluminum alloy with a yield strength of 241 MPa. If the hull is successfully pressure tested to 180 kPa on Earth, determine the factor of safety with respect to yielding.

A 475 N person stands at the end of a 1.42 m cantilever beam. The beam has a base of 95 mm and a height of 170 mm. Determine the maximum bending stress in the beam.

Force P = 48 N is applied to a lever at the end of a 34-mm-diameter shaft. Force Q = 150 N is applied directly to the shaft. Determine the normal stress σy at point H. Let a = 120 mm and b = 215 mm.

The pressure hull of a space station module has an inside diameter of 4.4 m, a length of 5.7 m, and a wall thickness of 2.6 mm. It is made from an aluminum alloy with a yield strength of 254 MPa. If the hull is successfully pressure tested to 160 kPa on Earth, determine the factor of safety with respect to yielding.

Determine the bar-spacing factor, cb, for a simply supported rectangular beam with b = 22 in. and No. 3 stirrups. This beam has five No. 7 bars as longitudinal reinforcement. The clear cover is 2 in.

Force P = 49 N is applied to a lever at the end of a 33-mm-diameter shaft. Force Q = 980 N is applied directly to the shaft. Determine the normal stress σy at point K. Let a = 135 mm and b = 235 mm.