Based on the output of the show commands below, what conclus…
Based on the output of the show commands below, what conclusions can you draw about the EtherChannel? S1#sh etherchannel summary Flags: D – down P – in port-channel I – stand-alone s – suspended H – Hot-standby (LACP only) R – Layer3 S – Layer2 U – in use f – failed to allocate aggregator u – unsuitable for bundling w – waiting to be aggregated d – default port Number of channel-groups in use: 1 Number of aggregators: 1 Group Port-channel Protocol Ports ——+————-+———–+———————————————- 1 Po1(SD) LACP Fa0/1(I) Fa0/2(I) Fa0/3(I) S1#sh run | b interface Port interface Port-channel1 ! interface FastEthernet0/1 channel-group 1 mode active ! interface FastEthernet0/2 channel-group 1 mode active ! interface FastEthernet0/3 channel-group 1 mode active ! S2#sh run | b interface Port interface Port-channel1 ! interface FastEthernet0/6 channel-group 1 mode auto ! interface FastEthernet0/7 channel-group 1 mode auto ! interface FastEthernet0/8 channel-group 1 mode auto !