Refer to the show command output. S1 is connected to another…

Refer to the show command output. S1 is connected to another switch, S2, via a trunk link. A host that is connected to S1 is not able to communicate to a host that is connected to S2, even though they are both in VLAN 20. Which command should be added to Fa0/1 on S1 to correct the problem?       S1#sh interfaces trunk   Port   Mode   Encapsulation Status    Native vlan Fa0/1  on     802.1q        trunking  40   Port   Vlans allowed on trunk Fa0/1  1,20,40,60,80   Port   Vlans allowed and active in management domain Fa0/1  1,20,40,60,80   Port   Vlans in spanning tree forwarding state and not pruned Fa0/1   1,20,40,60,80   S1#%CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/1 (40), with S2 FastEthernet0/1 (80).  

Refer to the exhibit. Which interface will be the exit inter…

Refer to the exhibit. Which interface will be the exit interface to forward a data packet that has the destination IP address 172.18.109.152?   Gateway of last resort is not set.172.18.109.0/26 is variously subnetted, 7 subnets, 3 masksO 172.18.109.0/26 via 172.18.32.1, 00:00:24, Serial0/0/0O 172.18.109.64/26 via 172.18.32.6, 00:00:56, Serial 0/0/1O 172.18.109.128/26 via 172.18.32.1, 00:00:24, Serial 0/0/0C 172.18.109.192/27 is directly connected, GigabitEthernet0/0L 172.18.109.193/27 is directly connected, GigabitEthernet0/0C 172.18.109.224/27 is directly connected, GigabitEthernet0/1L 172.18.109.225/27 is directly connected, GigabitEthernet0/1172.18.32.0/24 is variably subnetted, 4 subnets, 2 masksC 172.18.32.0/30 is directly connected, Serial0/0/0L 172.18.32.2/32 is directly connected, Serial0/0/0C 172.18.32.4/30 is directly connected, Serial0/0/1L 172.18.32.5/32 is directly connected, Serial0/0/1S 172.18.33.0/26 via 172.18.32.1, 00:00:24, Serial0/0/0